Class theme: Light 💡

I want each item to be a lighting device.

[9/14 - 9/16] 2nd attempt: box shaped lamp 💡

Process

Screenshot 2023-09-14 at 19.34.08.png

Failure: I want to cut 4 pieces of wood board with 45 degree angel and glue them together into a box. But there’s no table saw in the shop (and also Tandon MakerSpace) so I ended up using the belt sander to create the degreed shape not very accurately :(

Screenshot 2023-09-14 at 19.37.35.png

Screenshot 2023-09-14 at 19.38.05.png

Screenshot 2023-09-14 at 19.39.30.png

Not sure: I want to drill a groove to fit the LED inside the wood piece, I ended up drilling 10 holes; then used the chisel to make the edge smooth; and then used a driller to do further smoothing. Please let me know the best way to do this.

Screenshot 2023-09-16 at 13.44.32.png

I learnt how to use wood glue and clamper to glue the 4 pieces together.

Screenshot 2023-09-16 at 13.46.59.png

Final result

IMG_1336.MOV